Summary:
1. Configure the Neo router fa0/0 to connect to the ISP with a PPPoE DSL connection
- The Neo router should learn its public address dynamically
- Use the hostname "ABC" with a password of "abc123" to authenticate
2. Configure a default route out the Dialer interface you create on your router
3. Use the proper show commands to verify the PPPoE connection is working
4. Ping 4.2.2.2 and 8.8.8.8 to test Internet connectivity
NEO:
Create a dialer interface, aka the head:
int dialer 1
mtu 1492
encapsulation ppp
ip address negotiated !-----------------------getting an IP from DHCP
ppp chap hostname ABC
ppp chap password abc123
dialer pool 1
Tie the head with the body (fa0/0) to a pool:
int fa0/0
no shut
pppoe enable
pppoe-client dial-pool-number 1
Create a default route:
ip route 0.0.0.0 0.0.0.0 dialer 1
ISP: (note this part if not required by CCNA)
hostname ISP
!
username CBTNuggets password IsQuiteFun
!
bba-group pppoe PPPoE_Group
Virtual-template 1
!
interface FastEthernet0/0
pppoe enable group PPPoE_Group
no shutdown
!
interface Virtual-Template1
ip address 201.5.9.1 255.255.255.0
peer default ip address pool PPPoEClientPool
ppp authentication chap callin
!
ip local pool PPPoEClientPool 201.5.9.100 201.5.9.150
!
interface loopback 1
ip address 4.2.2.2 255.255.255.255
interface loopback 2
ip address 8.8.8.8 255.255.255.255
